Logging Facility; Logging File - Dell PowerConnect 6224 Command Line Interface Manual

Example
The following example limits messages logged to the console based on
severity level "alert".
console(config)#logging console alert

logging facility

Use the logging facility command in Global Configuration mode to set the
facility for logging messages. To reset to the default value, use the no form of
the command.
Syntax
logging facility
no logging facility
facility — The facility that will be indicated in the message. (Range:
•
local0, local1, local2, local3, local4, local5, local 6, local7)
Default Configuration
The default value is local7.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example sets the logging facility as local3.
console(config)#logging facility local3

logging file

Use the logging file command in Global Configuration mode to limit syslog
messages sent to the logging file based on severity. To cancel the buffer, use
the no form of this command.
1282
Syslog Commands
facility