Unit
----
1
2
3
Per Unit Status Parameters are explained as follows:
Parameter
NSF Support
show system
Use the show system command in User EXEC mode command to display
system information.
Syntax
unit
show system [
unit — The unit number.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays system information.
console#show system
NSF Support
-----------
Yes
Yes
Yes
Description
Whether a unit
supports NSF
]
Range
Yes or No
System Management Commands
Default
1329