Movemanagement - Dell PowerConnect 6224 Command Line Interface Manual

Syntax
unit switchindex
member
unit
no member
unit — The switch identifier of the switch to be added or removed from
•
the stack. (Range: 1–12)
switchindex — The index into the database of the supported switch types,
•
indicating the type of the switch being preconfigured. The switch index is
a 32-bit integer.
Default configuration
This command has no defaults.
Command Mode
Stack Global Configuration
User Guidelines
The switch index can be obtained by executing the show supported
switchtype command in User Exec mode.
Example
The following example displays how to add to stack switch number 2 with
index 1.
console(config)# stack
console(config-stack)# member 2 1

movemanagement

Use the movemanagement command in Stack Global Configuration mode to
move the Management Switch functionality from one switch to another.
Syntax
movemanagement
fromunit — The switch identifier on the current Management Switch.
•
tounit — The switch identifier on the new Management Switch.
•
fromunit tounit
System Management Commands
1299