Dell PowerConnect 6224 Command Line Interface Manual page 1325

Unit
Detected Code Version
Detected Code in Flash
Boot Code Version
Up Time
This example displays information about all units in the stack.
console>show switch
Switch Management
in Switch
Status
ID Status
-----------------------------------------------------
--------
1 Mgmt
Switch PCM8024
Different fields in the display are explained as follows:
Unit
Switch
Management Status
Description
This field displays the version of code running
on this switch. If the switch is not present and
the data is from preconfiguration, the code
version is "None."
This field displays the version of code that is
currently stored in FLASH memory on the
switch. This code will execute after the switch is
reset. If the switch is not present and the data is
from pre-configuration, then the code version is
"None."
This field displays the version of the boot
strapping code.
This field displays the system up time.
Preconfig
Code
Model ID
Version
PCM8024
Description
This field displays the unit identifier assigned to
the switch.
This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.
Plugged-
Model
System Management Commands
1.0.0.0
1325