Table of Contents
Advertisement
Firmware configuration
Web
Shows how to perform a task by using the local web interface.
Command line
Shows how to perform a task by using the command line interface.
Using Digi Remote Manager
By default, your IX20 device is configured to use Digi Remote Manager as its central management
server. Devices must be registered with Remote Manager using one of the following options:
As part of the getting started process. See the
n
If you have not registered the device already, you can do so using the Device ID, MACaddress,
n
IMEI, or your Remote Manager login credentials. See
For information about configuring central management for your IX20 device, see
management.
Using the local web interface
To connect to the IX20 local Web UI:
1. Use an Ethernet cable to connect the IX20's ETH2 port to a laptop or PC.
2. Open a browser and go to 192.168.2.1.
3. Log into the device using a configured user name and password.
The default user name is admin and the default password is the unique password printed on
the label packaged with your device.
After logging in, the local web admin dashboard is displayed.
The dashboard shows the current state of the device.
Dashboard
area
Description
Network
IX20 User Guide
Summarizes network statistics: the total number of bytes sent and received
n
Using Digi Remote Manager
Quick Start Guide
for information.
Add a device to Remote
Manager.
Central
52
Advertisement
Table of Contents
