Table of Contents
Advertisement
Services
n
Specific host names and their IP addresses.
The device is configured by default with the hostname digi.device, which corresponds to the
192.168.210.1 IP address.
To configure the DNS server:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > DNS.
4. Click Access control list to configure access control:
To limit access to specified IPv4 addresses and networks:
n
a. Click IPv4 Addresses.
b. For Add Address, click .
c. For Address, enter the IPv4 address or network that can access the device's DNS
IX20 User Guide
service. Allowed values are:
Use Digi Remote Manager to view and manage your
Configure DNS
676
Advertisement
Table of Contents
