Digi IX20W-PR User Manual page 4

Revision Date
R October 2023
IX20 User Guide
Description
n Digi Remote Manager support:
Each time a device connects to Digi Remote
l
Manager after the device boots (or re-boots), the
device now immediately uploads all health metrics.
VPN:
n
Added new Enable open routing configuration
l
setting (VPN > IP tunnels) to enable packets
destined for an address which is not explicitly in
the routing table to exit the IP tunnel.
Networking:
n
Added new TCP retries2 configuration setting
l
(Network > Advanced) to control the number of
times an unacknowledged TCP data packet will be
retransmitted before the connection is considered
lost.
Release of DigiIX20 firmware version 23.9:
Register a device to DRM:
n
Added a link to the Dashboard of the local web UI
l
to register and add the device to Digi Remote
Manager.
n Updated Dashboard:
Updated the layout of the Dashboard page of the
l
web UI to combine the network interface and
cellular modem details into a single Network
Activity panel.
Hotspot improvement:
n
Improved support for integration with
l
HotspotSystems, including:
PSD2 SessGarden
o
Login/Logout URL
o
Configurable remote webserver FQDN
o
n Primary Responder:
Added Primary Responder mode setting to lock
l
down the device to comply with AT&T FirstNet and
Verizon Response.
Domain allow list:
n
Added a Domain allow list feature to control what
l
domains are accessible through the Digi device.
Fallback:
n
4