Table of Contents
Advertisement
6. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Change the default hotspot bandwidth limits
Required configuration items
n
Enable default hotspot configuration. See
instructions.
n
Maximum download speed, in Kbps.
n
Maximum upload speed, in Kbps.
To change the default hotspot IP address and subnet:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Hotspots > hotspot.
IX20 User Guide
Enable hotspot using the default configuration
Use Digi Remote Manager to view and manage your
Hotspot
for
375
Advertisement
Table of Contents
