Table of Contents
Advertisement
Virtual Private Networks (VPN)
Configure the IX20-2 device
Task one: Create an IPsec tunnel
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > IPsec > Tunnels.
4. For Add IPsec Tunnel, type ipsec_gre2 and click .
5. Click to expand Authentication.
6. For Pre-shared key, type the same pre-shared key that was configured for the IX20-1
(testkey).
IX20 User Guide
Generic Routing Encapsulation (GRE)
Use Digi Remote Manager to view and manage your
601
Advertisement
Table of Contents
