Digi IX20W-PR User Manual page 5

Revision Date
S January 2024
Trademarks and copyright
Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States
and other countries worldwide. All other trademarks mentioned in this document are the property of
IX20 User Guide
Description
Added a fallback server setting to control which
l
DNS server is used as the fallback in the event that
no configured or DHCP-obtained DNS servers are
available.
MACsec tunnel:
n
Added information about adding a MACsec tunnel.
l
Release of DigiIX20 firmware version 23.12:
n Updated Active SIM slot definition:
modem.
FIPS feature is available for all DAL devices.
n
FIPS mode
Link OSPF routes through a DMVPN tunnel and allow
n
for redirection of packets between spokes.
DMVPN spoke.
Support for Rapid Spanning Tree Protocol (RSTP).
n
Configure a bridge.
n New setting which allows device to initiate a Realport
connection to a remote server.
service.
n New After option for the SIM preference schedule.
Configure cellular modem.
n New WAN Bonding proxy and Client devices options.
Use Digi Remote Manager to enable and configure WAN
bonding on multiple devices
on your local device.
n New BOOTP dynamic allocation option.
DHCP server.
n Renamed SureLink Attempts configuration setting to
Surelink test failures to better indicate what this
setting does.
New Telnet Login setting to control whether a user
n
must supply credentials when opening a Telnet
connection to access a serial port on a service.
Configure serial authentication.
New Advanced watchdog Modem check and recovery
n
setting to control whether watchdog will monitor
initialization of the IX20 cellular modem.
system watchdog.
Configure cellular
Enable
Configure a
Configure the RealPort
or Configure WAN bonding
Configure a
Configure the
5