Table of Contents
Advertisement
Services
6. Multicast DNS (mDNS) is enabled by default. mDNS is a protocol that resolves host names in
small networks that do not have a DNS server. To disable mDNS, or enable it if it has been
disabled, click Enable mDNS.
7. For SSL certificate, if you have your own signed SSL certificate, paste the certificate and
private key. If SSL certificate is blank, the device will use an automatically-generated, self-
signed certificate.
The SSL certificate and private key must be in PEM format.
n
The private key can use one of the following algorithms:
n
RSA
l
DSA
l
ECDSA
l
ECDH
l
Note
Example:
a. Generate the SSL certificate and private key, for example:
# openssl req -newkey rsa:2048 -nodes -keyout key.pem -x509 -days 365
-out certificate.pem
b. Paste the contents of certificate.pem and key.pem into the SSL certificate field. The
contents of the certificate.pem must be first. For example:
8. View is set to Auto by default and normally should not be changed.
9. Legacy port redirection is used to redirect client HTTP requests to the HTTPS service. Legacy
port redirection is enabled by default, and normally these settings should not be changed. To
disable legacy port redirection, click to expand Legacy port redirection and deselect Enable.
10. For Minimum TLS version, select the minimum TLS version that can be used by client to
negotiate the HTTPS session.
11. Click Apply to save the configuration and apply the change.
Command line
IX20 User Guide
Password-protected certificate keys are not supported.
Configure the web administration service
653
Advertisement
Table of Contents
