Table of Contents
Advertisement
Wi-Fi
o
o
n
WAN assignment. Once you configure a Wi-Fi client, you must assign the Wi-Fi client to a WAN.
See
Wide Area Networks (WANs) and Wireless Wide Area Networks (WWANs)
information.
Additional configuration items
Enable and configure background scanning, which allows the Wi-Fi client to move between
n
access points that have the same SSID as their signal strength varies.
Additional access points that client will attempt to use. If connection to one access point fails,
n
the device will attempt to connect to the next access point in the list.
Note
The IX20Wdevice supports a maximum of ten enabled Wi-Fi clients, regardless of the number of
enabled access points.
To configure a Wi-Fi client:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX20 User Guide
Identify the username.
Select the SCEP client. See
client
for information about SCEP clients.
Configure a Wi-Fi client and add client networks
Configure a Simple Certificate Enrollment Protocol
Use Digi Remote Manager to view and manage your
for further
350
Advertisement
Table of Contents
