Serial port
n
To limit access to specified IPv4 addresses and networks:
ii. For Add Address, click .
iii. For Address, enter the IPv4 address or network that can access the device's
iv. Click again to list additional IP addresses or networks.
To limit access to specified IPv6 addresses and networks:
n
ii. For Add Address, click .
iii. For Address, enter the IPv6 address or network that can access the device's
IX20 User Guide
i. Click IPv4 Addresses.
service-type. Allowed values are:
A single IP address or host name.
l
A network designation in CIDRnotation, for example, 192.168.1.0/24.
l
any: No limit to IPv4 addresses that can access the service-type.
l
i. Click IPv6 Addresses.
service-type. Allowed values are:
Configure UDP serial mode
278