Digi IX20W-PR User Manual page 8

Attach to DIN rail with clip
Attach to DIN rail with bracket
Firmware configuration
Review IX20 default settings
Local WebUI
Digi Remote Manager
Default interface configuration
Other default configuration settings
Primary Responder mode
Differences between standard firmware operation and Primary Responder mode
Enable Primary Responder mode
Change the default password for the admin user
Change the default SSID and pre-shared key for the preconfigured Wi-Fi access point
Configuration methods
Using Digi Remote Manager
Using the local web interface
Log out of the web interface
Use the local REST API to configure the IX20 device
Use the GET method to return device configuration information
Use the POST method to modify device configuration parameters and list arrays
Use the DELETE method to remove items from a list array
Using the command line
Access the command line interface
Log in to the command line interface
Exit the command line interface
Central management
Digi Remote Manager support
Certificate-based enhanced security
Configure your device for Digi Remote Manager support
Collect device health data and set the sample interval
Enable event log upload to Digi Remote Manager
Reach Digi Remote Manager on a private network
Pinhole method
Proxy server method
VPN Tunnel method
Log into Digi Remote Manager
Use Digi Remote Manager to view and manage your device
Add a device to Remote Manager
Add a device to Remote Manager using information from the label
Add a device to Remote Manager using your Remote Manager login credentials
Configure multiple IX20 devices by using Digi Remote Manager configurations
View Digi Remote Manager connection status
Learn more
Interfaces
Wide Area Networks (WANs)
Wide Area Networks (WANs) and Wireless Wide Area Networks (WWANs)
Configure WAN/WWAN priority and default route metrics
IX20 User Guide
39
40
43
43
43
43
44
45
45
46
47
49
51
52
52
53
53
53
55
56
58
58
58
59
61
61
61
68
71
73
73
73
74
74
75
75
75
76
77
78
79
81
82
82
8