Digi IX20W-PR User Manual page 847

Table of Contents

Advertisement

Applications
n
boot: The script will run once each time the device boots.
If boot is selected, set the action that will be taken when the script completes:
l
where action is one of the following:
o
o
o
n
interval: The script will start running at the specified interval, within 30 seconds after
the configuration change is saved. If interval is selected:
Set the interval:
l
where value is any number of weeks, days, hours, minutes, or seconds, and takes
the format number{w|d|h|m|s}.
For example, to set on_interval to ten minutes, enter either 10m or 600s:
(Optional) Configure the script to run only a single instance at a time:
l
If once is set to false, a new instance of the script will be started at every interval,
regardless of whether the script is still running from a previous interval.
n
set_time: Runs the script at a specified time of the day.
If set_time is set, set the time that the script should run, using the format HH:MM:
l
maintenance_time: The script will run during the system maintenance time window.
n
6. Set the commands that will execute the script:
(config system schedule script 0)> commands filename
(config system schedule script 0)>
where filename is the path and filename of the script, and any related command line
information.
If a Python script is being used, include the full path to the Python script and enclose in
n
quotation marks. For example:
IX20 User Guide
(config system schedule script 0)> exit_action action
(config system schedule script 0)>
none: Action taken when the script exits.
restart: Runs the script repeatedly.
reboot: The device will reboot when the script completes.
(config system schedule script 0)> on_interval value
(config system schedule script 0)>
(config system schedule script 0)> on_interval
(config system schedule script 0)>
(config system schedule script 0)> once true
(config system schedule script 0)>
(config system schedule script 0)> run_time HH:MM
(config system schedule script 0)>
Set up the IX20 to automatically run your applications
600s
847

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ix20Ix20wIx20-pr

Table of Contents