Digi IX20W-PR User Manual page 850

Applications

Web
Log into the IX20 WebUI as a user with full Admin access rights.
1. At the Status page, click Scripts.
The Scripts page displays:
2. For scripts that are currently running, click Stop Script to stop the script.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index Label
----- -----------
0 script1
1 script2
>
Scripts that are currently running have the status of active.
3. Stop the appropriate script:
)> system script stop script1
>
4. Save the configuration and apply the change
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
IX20 User Guide
Set up the IX20 to automatically run your applications
Enabled Status Run time
------- ------ --------
true active
true idle 01:00
850