Table of Contents
Advertisement
Firewall
n
Inbound provides an example of matching packets as they are routed from the device onto a
LAN interface.
These example bindings are disabled by default.
Enable the preconfigured bindings
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Quality of Service.
4. Click to expand either Outbound or Inbound.
5. Enable the binding.
6. Select an Interface.
7. Examine the remaining default settings and modify as appropriate for your network.
8. Click Apply to save the configuration and apply the change.
Command line
IX20 User Guide
Configure Quality of Service options
Use Digi Remote Manager to view and manage your
962
Advertisement
Table of Contents
