Digi IX20W-PR User Manual page 344

Wi-Fi
3. Create a new access point.
By default, the IX20Wcomes with one preconfigured access point, named Digi AP. In these
instructions, we will use the existing Digi AP access point and create another new access point,
named new_AP.
a. Click Network > WiFi > Access points.
b. For Add WiFi access point:, type a name for the access point and click .
c. For SSID, type the SSID. Up to 32 characters are allowed.
d. Select the appropriate type of Encryption and complete the encryption-related fields as
appropriate. See
personal
4. Configure the firewall:
a. Click Firewall > Zones.
b. In Add Zone, enter LAN2_isolation_zone for the name of the zone and click .
Note We will be creating LAN2 later in the procedure.
c. Create a firewall filter to provide internet access for the LAN2_isolation_zone:
i. For Add packet filter, click .
ii. For Label, type Allow LAN2_isolation_zone to External.
iii. For Source zone, select LAN2_isolation_zone.
iv. For Destination zone, select External.
IX20 User Guide
Configure an open Wi-Fi access
security, or Configure a Wi-Fi access point with enterprise security
Isolate Wi-Fi clients
point, Configure a Wi-Fi access point with
for details.
344