Table of Contents
Advertisement
Virtual Private Networks (VPN)
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > MACsec.
4. For Add MACsec tunnel, click .
5. Click Enable.
6. For Local endpoint, select the local network device you want to use to connect to the peer
device.
7. For Security mode, select your desired mode.
Automatic: Uses a pre-shared key to generate association key information, which is
n
periodically rotated through using 802.1x.
Manual: Uses connectivity association key information that is manually entered in the
n
CAK and CKN fields.
8. If you selected Manual, additional required fields display.
a. For CAK, enter the connectivity associated key. The key format is 16 hex digits.
b. For CKN, enter the connectivity associated key name. The key format is 32 hex digits.
9. Click Apply to save the configuration and apply the change.
Command line
IX20 User Guide
Use Digi Remote Manager to view and manage your
MACsec
634
Advertisement
Table of Contents
