Table of Contents
Advertisement
Services
iii. Select for Tunnel password.
iv. From the Common value menu, select Require override:
e. Configure the device's WAN interfaces that will be bonded:
i. ClickNetwork > SD-WAN > WAN bonding > Bonding interfaces.
ii. Click to add an interface.
iii. Select Interfaces and select a WAN interface to be bonded.
Note
WWAN cellular connections. Consider this prioritization if using both wired Ethernet
and cellular Internet connections. Make sure to add the highest priority in-use
interface(s) to the WAN Bonding settings.
iv. Enable Bonding Proxy to further optimize standard TCP traffic.
IX20 User Guide
By default, IX20 devices prioritize their WAN Ethernet connection over any
WAN bonding
684
Advertisement
Table of Contents
