Default Outbound Wan/Wwan Ports - Digi IX20W-PR User Manual

Interfaces
3. Use the del command to delete the WAN or WWAN. For example, to delete a WWAN named
my_wwan:
(config)> del network interface my_wwan
4. Save the configuration and apply the change
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Default outbound WAN/WWAN ports

The following table lists the default outbound network communications for IX20 WAN/WWAN
interfaces:
Description
Digi Remote Manager connection to edp12.devicecloud.com .
NTP date/time sync to time.devicecloud.com .
DNS resolution using WAN-provided DNS servers.
HTTPS for modem firmware downloads from
firmware.devicecloud.com .
IX20 User Guide
Wide Area Networks (WANs)
Port
TCP/UDP number
TCP 3199
UDP 123
UDP 53
TCP 443
178