Digi IX20W-PR User Manual page 333

Wi-Fi
(config)> network wifi ap digi_ap ssid_broadcast true
(config)>
6. Set the security for the access point to a personal security option:
(config network wifi ap new_AP)> encryption type value
(config network wifi ap new_AP)>
where value is one of:
n psk: Uses WPA Personal (PSK). All Wi-Fi clients must support WPA to be able to
authenticate.
Note
available. For more information about Primary Responder mode, see
between standard firmware operation and Primary Responder
Note
characters, you can use the wpa_passphrase tool to generate the appropriate pre-
shared key. The wpa_passphrase command is available in the shell console of a DAL OS
Digi device. For details about the command, see the
n mixedpsk: Uses mixed WPA/WPA2 Personal (PSK) mode. Wi-Fi clients that support WPA
and WPA2 are able to authenticate.
Note
available. For more information about Primary Responder mode, see
between standard firmware operation and Primary Responder
psk2: Uses WPA2 Personal (PSK) mode. All Wi-Fi clients must support WPA2 to be able
n
to authenticate.
psk2sae: Uses WPA2-PSK/WPA3-AES mixed mode. Wi-Fi clients that support WPA2 and
n
WPA3 are able to authenticate.
sae: Uses WPA3 Personal mode. All Wi-Fi clients must support WPA3 to be able to
n
authenticate.
(config network wifi ap new_AP)> encryption type psk2sae
(config network wifi ap new_AP)>
7. (Optional) Determine whether to prevent clients that are connected to this access point from
communicating with each other:
(config)> network wifi ap digi_ap isolate_client true
(config)>
See Isolate Wi-Fi clients
access points from communicating with each other.
8. Set the password that clients will use when connecting to the access point:
(config)> network wifi ap digi_ap encryption key_psk2 password
(config)>
IX20 User Guide
When Primary Responder mode is enabled, the WPA personal security mode is not
If you need to configure a Wi-Fi passphrase with any non-printable ASCII
When Primary Responder mode is enabled, the WPA personal security mode is not
for information about how to prevent clients connected to different
Configure a Wi-Fi access point with personal security
wpa_passphrase Linux
Differences
mode.
command.
Differences
mode.
333