Digi IX20W-PR User Manual page 359

Wi-Fi
To show the status and statistics for Wi-Fi access points, use the
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi ap:
> show wifi ap
AP
--------
my_AP
digi_ap
>
3. To view information about both active and inactive access points, include the all parameter:
> show wifi ap all
AP
--------
my_AP
digi_ap
digi_ap2
>
Show detailed status and statistics of a specific Wi-Fi access point
To show a detailed status and statistics of a Wi-Fi access point, use the show wifi ap name name
command.
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type show wifi ap name name:
> show wifi ap name my_AP
my_AP Access Point Status
-------------------------
Enabled
Status
SSID
Security
Channel
Channel Width
IX20 User Guide
Enabled Status SSID
------- ------ -------------
true up my_SSID
true up Digi2
Enabled Status SSID
------- ------ -------------
true up my_SSID
true up Digi2
false down
: true
: up
: my_AP
: none
:
:
Show Wi-Fi access point status and statistics
show wifi ap command.
BSSID
-----------------
01:41:D1:14:36:37
00:40:D0:13:35:36
BSSID
-----------------
01:41:D1:14:36:37
00:40:D0:13:35:36
359