Table of Contents
Advertisement
Interfaces
where value is one of:
n
n
n
n
n
IX20 User Guide
ping: Uses ICMP to determine connectivity.
If ping is selected, complete the following:
Set the ping_method:
l
(config network interface my_wan surelink tests 1)> ping_
method value
(config network interface my_wan surelink tests 1)>
where value is one of:
o
hostname: The hostname or IP address of an external server.
o
Set ping_host to the hostname or IP address of the server:
(config network interface my_wan surelink tests 1)> ping_
host hostname/IP_address
(config network interface my_wan surelink tests 1)>
o
interface_gateway. If set, an initial traceroute is sent to the hostname or IP
address configured in the SureLink advanced settings, and then the first hop
in that route is used for the ping test.
interface_address.
o
interface_dns: The interface's DNS server.
o
Set the number of bytes to send as part of the ping payload:
l
(config network interface my_wan ipsec tunnel ipsec_example
surelink tests 1)> ping_size int
(config network interface my_wan surelink tests 1)>
dns: Performs a DNS query to the named DNS server.
If dns is set, set the IPv4 or IPv6 address of the DNS server:
(config network interface my_wan surelink tests 1)> dns_server
IP_address
(config network interface my_wan surelink tests 1)>
http: Uses HTTP(s) GET requests to determine connectivity to the configured web
server.
If http is set, set the URL of the web server.
(config network interface my_wan surelink tests 1)> http url
(config network interface my_wan surelink tests 1)>
dns_configured: Tests communication with DNS servers that are either provided
by DHCP, or statically configured for this interface.
interface_up: Tests the current status of the interface. The test fails if the interface
is down. Failing this test infers that all other tests fail.
If interface_up is set, complete the following:
Wide Area Networks (WANs)
111
Advertisement
Table of Contents
