Table of Contents
Advertisement
User authentication
b. Set the amount of time that the user is locked out after the number of unsuccessful login
attempts defined in lockout tries:
(config auth user new_user> lockout duration value
(config auth user new_user)>
where value is any number of minutes, or seconds, and takes the format number{m|s}.
For example, to set duration to ten minutes, enter either 10m or 600s:
(config auth user new_user)> lockout duration 600s
(config auth user new_user)>
The minimum value is 1 second, and the maximum is 15 minutes. The default is 15
minutes.
7. Add groups for the user.
Groups define user access rights. See
groups.
a. Add a group to the user. For example, to add the admin group to the user:
(config auth user new_user> add group end admin
(config auth user new_user)>
Note
Every user must be configured with at least one group.
b. (Optional) Add additional groups by repeating the add group command:
(config auth user new_user> add group end serial
(config auth user new_user)>
To remove a group from a user:
a. Use the show command to determine the index number of the group to be deleted:
(config auth user new_user> show group
0 admin
1 serial
(config auth user new_user>
b. Type the following:
(config auth user new_user)> del group n
(config auth user new_user)>
Where n is index number of the authentication method to be deleted. For example, to
delete the serial group as displayed by the example show command, above:
(config auth user new_user)> del group 1
(config auth user new_user)>
8. (Optional) Add SSH keys for the user to use passwordless SSH login:
IX20 User Guide
Authentication groups
for information about configuring
Local users
889
Advertisement
Table of Contents
