Table of Contents
Advertisement
Virtual Private Networks (VPN)
Additional configuration items
n
The home agent Software Parameter Index (SPI).
n
Path MTU discovery.
Path MTU discovery is enabled by default. If it is disabled, identify the MTU.
n
Care of address: the local network interface that is used to communicate with the peer.
If set to Interface, identify the local interface to be used. Generally, this will be the
l
Wirelesss WAN (Modem).
If set to IP address, enter the IP address.
l
The local network of the GRE endpoint negotiated by NEMO.
n
If the local network is set to Interface, identify the local interface to be used.
l
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > NEMO.
The NEMO tunnel is enabled by default. To disable, toggle off Enable.
4. For Home IP address, type the IPv4 address of the NEMO virtual network interface.
IX20 User Guide
Use Digi Remote Manager to view and manage your
NEMO
637
Advertisement
Table of Contents
