Table of Contents
Advertisement
Interfaces
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. For single-cellular models, click Network > Modems > WWAN cellular modem or Modem.
4. Click Network > Modems > Modem.
5. Modem configurations are enabled by default. Click to toggle Enable to off to disable.
IX20 User Guide
Use Digi Remote Manager to view and manage your
Wide Area Networks (WANs)
130
Advertisement
Table of Contents
