Digi IX20W-PR User Manual page 402

3. Create a new hotspot
4. Set the authentication mode to radius-users:
(config)> network hotspot hotspot_name auth radius-users
(config)>
5. Configure the RADIUS server:
a. Set the fully qualified domain name or IP address of the primary RADIUS server:
(config)> network hotspot hotspot_name radius primary_radius_server
address
(config)>
b. (Optional) Set the fully qualified domain name or IP address of the secondary RADIUS
server, used if the primary RADIUS server is unreachable:
(config)> network hotspot hotspot_name radius backup_radius_server
address
(config)>
c. (Optional) Set the port number to use for RADIUS authentication requests.
(config)> network hotspot hotspot_name radius auth_port port
(config)>
The default is 1812.
d. (Optional) Set the port number to use for RADIUS accounting requests.
(config)> network hotspot hotspot_name radius acct_port port
(config)>
The default is 1813.
e. Set the shared secret for the RADIUS server. This is configured on the RADIUS server.
(config)> network hotspot hotspot_name radius secret secret
(config)>
f. Set the unique Network Access Server (NAS) identifier used by the RADIUS server:
(config)> network hotspot hotspot_name radius nas_id id
(config)>
The default is hotspot.
g. (Optional) Enable Swap Octets to swap the meaning of the input octets/packets and
output octets/packets RADIUS attributes. This can fix issues if the data limits and/or
accounting reports appear to be reversed on the RADIUS server:
(config)> network hotspot hotspot_name radius swap octets true
(config)>
The default is disabled.
IX20 User Guide
or Enable hotspot using the default configuration.
Hotspot
402