Table of Contents
Advertisement
Routing
(config)> save
Configuration saved.
>
5. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Example: Domain-based routing with dual WAN
This example routes traffic destined for a specific domain to the WAN Ethernet port, and never
through the cellular modem.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX20 User Guide
Use Digi Remote Manager to view and manage your
IP routing
434
Advertisement
Table of Contents
