Digi IX20 hardware setup
Tips for improving cellular signal strength
If the signal strength LEDs or the signal quality for your device indicate Poor or No service, try the
following things to improve signal strength:
Move the device to another location.
n
Try connecting a different set of antennas, if available.
n
n
Purchase a Digi Antenna Extender Kit:
Connect data cables
The IX20 supports two types of data ports:
n
Ethernet (RJ-45): Use a Cat 5e or Cat 6 Ethernet cable.
n
Serial (9-pin RS-232): Use a serial cable with a 9-pin RS-232 connector.
Mount the IX20 device
There are three options for mounting the IX20 device:
n
Attach to a mounting surface by using the mounting
n
Attach to DIN rail with
n
Attach to DIN rail with
Attach to a mounting surface by using the mounting tabs
Attach to DIN rail with clip
The DIN rail clip is an optional accessory included when the IX20 is purchased with accessories.
IX20 User Guide
Antenna Extender Kit,
clip.
bracket.
Connect data cables
1m.
tabs.
39