Table of Contents
Advertisement
Services
e. Add additional topics:
f. Repeat the above steps to set the topic and access type.
13. Save the configuration and apply the change
(config)> save
Configuration saved.
>
14. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Show MQTT broker information
You can view status and statistics about the MQTT broker from either the WebUI or the command line.
Web
Log into the IX20 WebUI as a user with full Admin access rights.
1. On the main menu, click Status.
2. Under Services, click MQTT Broker.
Command line
Show MQTT broker information
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
show mqtt
> show location
MQTT Broker Status
------------------
Enabled
Status
Version
Uptime
IX20 User Guide
readwrite
l
write
l
The default is readwrite.
(config service mqtt topic_acl pattern 0)> add .. .. pattern end
(config service mqtt topic_acl pattern 1)>
command at the system prompt:
: true
: up
: mosquitto version 2.0.14
:
(202s)
Use the MQTT broker service
784
Advertisement
Table of Contents
