Table of Contents
Advertisement
b. Highlight the hotspot directory and click to open the directory.
c. Click (upload).
d. Browse to the location of the HTML file on your local machine. Select the file and click
Open to upload the file.
2. Configure the hotspot to use your custom HTML file:
a. On the menu, click Network > Hotspot.
b. Click the name of the appropriate hotspot to expand.
c. Ensure that Login page source is set to Local.
d. For Login page, type the name of your custom HTML file.
e. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the
scp
For example:
> scp host 192.168.4.1 user admin remote /home/admin/temp/ local
/etc/config/hotspot/custom.html to local
3. Configure the hotspot to use your custom HTML file:
a. Type config to change to configuration mode:
> config
(config)>
b. Set login to local-page:
(config)> network hotspot hotspot_name login local
(config)>
c. Set local-page to your custom HTML file:
(config)> network hotspot hotspot_name local-page custom.html
d. Save the configuration and apply the change
(config)> save
Configuration saved.
>
IX20 User Guide
command to upload the edited file from your local machine the the IX20 device.
Hotspot
412
Advertisement
Table of Contents
