Digi IX20W-PR User Manual page 133

Interfaces
The default is any.
5. Set the SIM slot that should be used by the modem:
(config)> network modem modem sim_slot value
(config)>
where value is one of the following:
any: Uses either SIM slot.
n
1: Uses the first SIM slot.
n
2. Uses the second SIM slot.
n
The default is any.
6. If sim_slot is set to any, set the SIM slot that should be considered the preferred slot for this
modem:
(config)> network modem modem sim_slot_preference value
(config)>
where value is one of the following:
none: Does not consider either SIM slot to be the preferred slot.
n
1: Configures the first SIM slot as the preferred SIM slot.
n
2. Configures the second SIM slot as the preferred SIM slot.
n
In the event of a failover to a non-preferred SIM, or if manual SIM switching is used to switch to
a non-preferred SIM, the modem will attempt to reconnect to the SIM in the preferred SIM slot.
The default is none.
7. To set the preferred SIM slot check schedule:
(config)> network modem modem sim_slot_preference_value
where value is one of the following:
1: SIM slot 1.
n
2. SIM slot 2.
n
(config)> ...run-time when value
where value is one of the following:
after
n
boot
n
interval
n
IX20 User Guide
Default value: /device/usb/modem/module
Current value: /device/usb/modem/module
(config)> network modem modem port
b. Set the port:
(config)> network modem modem port /device/usb/modem/module
(config)>
Wide Area Networks (WANs)
133