Table of Contents
Advertisement
Interfaces
d. For Priority, enter the system priority. The default priority number is 8.
e. (Optional) For Custom mstpd options, enter the extra configuration options to pass to
mspd daemon.
9. Add devices to the bridge:
a. Click to expand Devices.
b. For Add device, click .
c. Select the Device.
d. Repeat to add additional devices.
Note
The MACaddress of the bridge is taken from the first available device in the list.
10. Click Apply to save the configuration and apply the change.
Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Create the bridge:
(config)> add network bridge my_bridge
(config network bridge my_bridge)>
4. Bridges are enabled by default.
n
To disable:
(config network bridge my_bridge)> enable false
(config network bridge my_bridge)>
n
To enable if it has been disabled:
(config network bridge my_bridge)> enable true
(config network bridge my_bridge)>
5. Set the bridge mode to standard:
(config network bridge my_bridge)> mode standard
(config network bridge my_bridge)>
6. Add devices to the bridge:
a. Determine available devices:
(config network bridge my_bridge)> .. .. interface lan device ?
IX20 User Guide
Bridging
238
Advertisement
Table of Contents
