Show Nemo Status - Digi IX20W-PR User Manual

Virtual Private Networks (VPN)
15. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show NEMO status


Web
Log into the IX20 WebUI as a user with full Admin access rights.
1. On the menu, select Status > NEMO.
The NEMO page appears.
2. To view configuration details about an NEMO tunnel, click the  (configuration) icon in the
upper right of the tunnel's status pane.

Command line
1. Select the device in Remote Manager and click Actions > Open Console, or log into the IX20
local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. To display details about all configured NEMO tunnels, type the following at the prompt:
> show nemo
NEMO Enable
---- ------
demo false
test true
>
3. To display details about a specific tunnel:
> show nemo name test
test NEMO Status
----------------
Enabled
Status
Home Agent
Care of Address
Interface
GRE Tunnel
Metric
MTU
Lifetime (Actual)
Local Network
-------------
IX20 User Guide
Status Address Agent
------ ------- -------
up 1.2.3.4 4.3.2.1
: true
: up
: 4.3.2.1
: 10.10.10.1
: modem
: 10.10.10.1 === 4.3.2.1
: 255
: 1476
: 600
Subnet Status
-------------- ----------
CoAddress
----------
10.10.10.1
NEMO
642