Digi IX20W-PR User Manual page 814

Applications
iii. Click System > Scheduled tasks > Custom scripts.
iv. Click  to add a custom script.
v. For Label, type Show system application.
vi. For Run mode, select On boot.
vii. For Exit action, select Restart script.
viii. For Commands, type python /etc/config/scripts/showsystem.py.
ix. Click Apply to save the configuration and apply the change.

Command line
i. Select the device in Remote Manager and click Actions > Open Console, or log into
the IX20 local command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access
selection menu. Type admin to access the Admin CLI.
ii. At the command line, type config to enter configuration mode:
> config
(config)>
IX20 User Guide
The Configuration window is displayed.
Develop Python applications
814