Configure An Interface To Operate In Passthrough Mode - Digi IX20W-PR User Manual

Interfaces
Description
DNS server
DHCP server
SSH server
Web UI

Configure an interface to operate in passthrough mode.

You can configure interfaces on your IX20 device to operate in passthrough mode, which means that
the device passes the IP address assigned to it on a WAN or cellular modem interface, to a client
connected to a LAN interface.

Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
IX20 User Guide
TCP/UDP Port numbers
UDP 53
UDP 67 and 68
TCP 22
TCP 443 (also listens on port 80, then redirects to port 443
Use Digi Remote Manager to view and manage your
Local Area Networks (LANs)
220