Digi IX20W-PR User Manual page 576

Virtual Private Networks (VPN)
n
n
n
IX20 User Guide
custom_test: Tests the interface with custom commands.
If custom_test is set, set the commands to run to perform the test:
(config vpn openvpn client openvpn_client1
custom_test_commands "string"
(config vpn openvpn client openvpn_client1 surelink tests 1)>
tcp_connection: Tests that the interface can reach a destination port on the
configured host.
If tcp_connection is selected, complete the following:
Set the hostname or IP address of the host to create a TCP connection to:
l
(config vpn openvpn client openvpn_client1 surelink tests 1)>
tcp_host hostname/IP_address
(config vpn openvpn client openvpn_client1 surelink tests 1)>
Set the TCP port to create a TCP connection to.
l
(config vpn openvpn client openvpn_client1 surelink tests 1)>
tcp_port port
(config vpn openvpn client openvpn_client1 surelink tests 1)>
other: Tests the status of another interface.
If other is selected, complete the following:
Set the interface to test.
l
i. Use the ? to determine available interfaces:
(config vpn openvpn client openvpn_client1 surelink tests
1)> other_interface ?
Test interface: Test the status of this other interface.
Format:
/network/interface/defaultip
/network/interface/defaultlinklocal
/network/interface/eth1
/network/interface/eth2
/network/interface/loopback
Current value:
(config vpn openvpn client openvpn_client1 surelink tests
1)> other_interface
ii. Set the interface. For example:
(config vpn openvpn client openvpn_client1 surelink tests
1)> other_interface /network/interface/eth1
(config vpn openvpn client openvpn_client1 surelink tests
1)>
OpenVPN
surelink tests 1)>
576