Table of Contents
Advertisement
Interfaces
Note
For devices using Unitac modems (such as devices with the 1002-CM45 core module), carrier
scanning will not work if the modem has an active cellular connection.
Web
Log into the IX20 WebUI as a user with full Admin access rights.
1. From the main menu, click Status > Modems.
2. Scroll to the Connection Status section and click SCAN.
The Carrier Scan window opens.
3. (Optional) Change the Timeout for the carrier scan. The default is 300 seconds.
4. When the Carrier Scan window opens, the results of the most recent previous scan are
displayed. If there is no previous scan available, or to refresh the list, click SCAN.
5. The current carrier is highlighted in green. To switch to a different carrier:
a. Highlight the appropriate carrier and click SELECT.
The Carrier selection dialog opens.
b. For Carrier selection mode, select one of the following:
n
IX20 User Guide
Manual/Automatic: The device will use automatic carrier selection if this carrier is
not available.
Wide Area Networks (WANs)
149
Advertisement
Table of Contents
