Table of Contents
Advertisement
Interfaces
Additional configuration items
n
See
Configure SureLink active recovery to detect WAN/WWAN failures
configuration parameters.
To configure the IX20 device to reboot when an interface has failed:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create a new interface or select an existing one:
n
To create a new interface, see
Area Network
n
To edit an existing interface, click to expand the appropriate interface.
IX20 User Guide
Use Digi Remote Manager to view and manage your
Configure a Local Area Network
(WAN), or
Configure a Wireless Wide Area Network
Wide Area Networks (WANs)
for optional SureLink
(LAN),
Configure a Wide
(WWAN).
104
Advertisement
Table of Contents
