Table of Contents
Advertisement
Virtual Private Networks (VPN)
3. Click VPN > OpenVPN > Clients.
4. Create a new OpenVPN client or select an existing one:
n
To create a new OpenVPN client, see
or
Configure an OpenVPN client without using an .ovpn
n
To edit an existing OpenVPN client, click to expand the appropriate client.
5. After creating or selecting the OpenVPN client, click SureLink.
6. Enable SureLink.
7. (Optional) Change the Test interval between connectivity tests.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format number{w|d|h|m|s}.
For example, to set Interval to ten minutes, enter 10m or 600s.
The default is 15 minutes.
8. (Optional) If more than one test target is configured, for Success condition, select either:
n
One test passes: Only one test needs to pass for Surelink to consider an interface to be
up.
n
All test pass: All tests need to pass for SureLink to consider the interface to be up.
9. (Optional) For Pass threshold, type or select the number of times that the test must pass after
failure, before the interface is determined to be working and is reinstated.
IX20 User Guide
Configure an OpenVPN client by using an .ovpn file
file.
OpenVPN
568
Advertisement
Table of Contents
