Table of Contents
Advertisement
8. For Zone, leave at the default setting of hotspot. The hotspot firewall zone provides the
necessary firewall rules for hotspot functionality.
9. For Device, select an access point, and Ethernet port, or a bridge.
10. For Authentication Mode, select one of the following:
n
Click-through: Requires each user to accept the terms and conditions.
n
Local shared password: Requires each user to enter a password. This password is
validated locally on the IX20 device, and the password is the same for all users.
See
about configuring hotspot for local shared password authentication.
n
RADIUS shared password: Requires each user to enter a password. This password is
validated by an external RADIUS server, and the password is the same for all users.
See
information about configuring hotspot for RADIUS shared password authentication.
RADIUS users: Requires each user to enter username and password credentials that are
n
established on an external RADIUS server. The credentials are validated by the RADIUS
server.
See
configuring hotspot for RADIUS users authentication.
HotspotSystem: Requires each user to be authenticated by HotspotSystem, a cloud
n
hotspot service that supports various free and paid authentication methods, including
social media account, SMS, voucher, and PayPal.
See
configuring hotspot for HotspotSystem authentication.
11. For Login page source, select either:
n
Local: Uses an HTML page for authentication that is stored locally on the IX20 device's
filesystem, in the /etc/config/hotspot directory. Note that the hotspot directory is not
visible until hotspot has been enabled for the first time.
n
Remote: Uses an HTML page for authentication that is served by a remote web server.
This parameter is not available if HotspotSystem is selected for the Authentication mode.
12. (Optional) If Local is selected for Login page source, for Login page, type the name of the
local HTML file used for authentication. This parameter is not available if HotspotSystem is
selected for the Authentication mode.
Normally, this field should be left blank, and the device will use the default authentication
HTML page. See
authentication HTML page used for each authentication mode.
If you upload a custom HTML file that uses a filename other than the default filename, type the
custom filename here. See
creating and uploading custom HTML files.
13. (Optional) For Authentication port, type the port number that the hotspot authentication
server will used. The default is 3990.
14. (Optional) For Server port, type the port number of the hotspot server. The default is 4990.
IX20 User Guide
Configure the hotspot to use local shared password authentication
Configure the hotspot to use RADIUS shared password authentication
Configure the hotspot to use RADIUS users authentication
Configure the hotspot to use HotspotSystem authentication
Hotspot authentication modes
Upload custom hotspot HTML pages
for information about
for information about
for information about the default
for more information about
Hotspot
for information
for
384
Advertisement
Table of Contents
