Ip Multicast Handle-Igmp-Immediately - Allied Telesis IE220 Series Manual

M C
ULTICAST OMMANDS
- -
IP MULTICAST HANDLE IGMP IMMEDIATELY

ip multicast handle-igmp-immediately

Overview Use this command to allow traffic to be switched as soon as an IGMP report is
received.
Use the no variant of this command to revert to the default setting.
Syntax ip multicast handle-igmp-immediately
no ip multicast handle-igmp-immediately
Default Turned off. This means that traffic will be switched after either a 1 second delay or
if the IGMP buffer fills with 250 packets.
Mode Global Configuration
Example To turn on this feature, use the commands:
awplus#
awplus(config)#
Related show running-config
commands
Command Supported since software version 5.4.9-2.0
changes
C613-50644-01 Rev B
configure terminal
ip multicast handle-igmp-immediately
Command Reference for IE220 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
1076