Clear Loop-Protection Counters - Allied Telesis AT-x510-28GTX Command Reference Manual

S C
WITCHING OMMANDS
-
CLEAR LOOP PROTECTION COUNTERS

clear loop-protection counters

Overview Use this command to clear the counters for the Loop Protection counters.
clear loop-protection [interface <port-list>] counters
Syntax
Mode Privileged Exec
Examples To clear the counter information for all interfaces:
awplus#
To clear the counter information for a single port:
awplus#
C613-50102-01 REV C
Parameters Description
interface
The interface whose counters are to be cleared.
<port-list>
A port, a port range, or an aggregated link.
clear loop-protection counters
clear loop-protection interface port1.0.1 counters
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
428