3 Specifications
3-6
External Dynamic Brake Resistor
This section describes the specifications of the External Dynamic Brake Resistor.
For the external dimensions, refer to 2-4-7 Dimensions of External Dynamic Brake Resistors on page
2-120.
3-6-1
General Specifications
Item
Dielectric strength
Insulation resistance
Operating ambient tempera-
ture and humidity
Storage ambient temperature
and humidity
Operating and storage atmo-
sphere
Frequency of use
Deceleration patterns
3-6-2
Characteristics
Applicable
Servo Drive
(R88D-1SN
-ECT)
55H, 75H
150H
55F, 75F
150F
3 - 132
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User's Manual (I586)
Between terminals and case: 2,000 VAC for 1 min (at 50/60 Hz)
Between terminals and case: 20 MΩ min. (at 500 VDC)
0 to 55°C, 90% max. (with no condensation)
-25 to 85°C, 95% max. (with no condensation)
No corrosive gases
3 minutes or more per activation
10,000 times at rated rotation speed and applicable load inertia
External Regeneration Resistor
Resis-
Model
tance
value
R88A-DBR30001R5
1.5 Ω
R88A-DBR30001R2
1.2 Ω
R88A-DBR30004
4 Ω
R88A-DBR30005
5 Ω
Model
R88A-DBR300
Heat
Heat
radiation
radiation
specifica-
condition
tion
Natural cool-
Aluminum
ing
350 mm ×
350 mm
Thickness:
t3.0 mm
Wire size
Weight
1.6 kg
AWG 16
(Rated tempera-
ture: 200°C)
Length: 500 mm