1-6
Unit Versions
The 1S-series Servo Drive uses unit versions.
Unit versions are used to manage differences in supported functions due to product upgrades, etc.
1-6-1
Confirmation Method
The unit version of 1S-series is displayed at the location shown below.
Eth er
CA T
1-6-2
Unit Versions and Sysmac Studio Versions
The supported functions depend on the unit version of the 1S-series. When you use the functions that
were added for an upgrade, you must use the version of Sysmac Studio that supports those functions.
Refer to A-6 Version Information on page A-179 for the relationship between the unit versions and the
Sysmac Studio versions, and for the functions that are supported by each unit version.
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User's Manual (I586)
Display location
Display on the product
1 Features and System Configuration
Unit version
1
1 - 33