Omron R88M-1M Series User Manual page 918

Appendices
Event name Motor Non-conformity
Description The Servo Drive and motor combination is not correct.
EtherCAT Master Function Mod-
Source
ule
Error
Level
attributes
Effects User program Continues.
EtherCAT NET RUN
Indicators
---
System Variable
-defined
None
variables
Assumed cause
Cause and
The Servo Drive and motor com-
correction
bination is not correct
Attached Information 1: Cause Details
Attached 1: Error at a time when the capacity of the connected Servomotor does not conform to the capacity of Servo
information Drive.
2: The Servomotor with different operating voltage is connected.
Precautions/ AL status code: -, Error No.: 9501 hex
Remarks
A - 132
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User's Manual (I586)
Source details
Minor fault
Recovery
Operation
EtherCAT NET ERR
---
Data type
None
Correction
Replace the motor with one that
matches the Servo Drive.
Event code 246D0000 hex
Slave Detection
timing
Error reset
(after cycling Log category
slave power)
Power drive circuit is OFF
EtherCAT LINK/ACT
---
Name
None
Prevention
Use a motor that matches the
Servo Drive.
At power ON
System log