Omron R88M-1M Series User Manual page 654

9 Details on Servo Parameters
Subindex 81 hex: Total Power ON Time
• Gives the total power ON time of the Servo Drive (control power supply).
• The data is saved in the non-volatile memory approximately every hour.
Subindex 82 hex: Total Capacitor Operating Time
• Gives the total operating time of the capacitor.
Subindex 83 hex: Capacitor Operating Time Ratio
• Gives the ratio of the present operating time to the lifetime of the capacitor.
• When the ratio is 100%, the lifetime reaches the end.
Subindex 84 hex: Inrush Current Prevention Relay ON Count
• Gives the number of times when the inrush current prevention relay is changed to ON.
• The data is saved in the non-volatile memory approximately every hour.
Subindex 85 hex: Dynamic Brake Relay ON Count
• Gives the number of times the command was sent to change the dynamic brake relay contact to ON.
This is not the number of deceleration operations performed with the dynamic brake.
• The data is saved in the non-volatile memory approximately every hour.
Subindex 86 hex: Motor Operating Time
• Gives the total time when the motor is not in a stop state.
• The data is saved in the non-volatile memory approximately every hour.
Subindex 87 hex: Brake Interlock Output Relay ON Count
• Gives the number of times when the brake interlock output relay is changed to ON.
• The data is saved in the non-volatile memory approximately every hour.
Subindex F1 hex: Motor Operating Time Clear
• Clears the motor operating time counter. Clear is executed by the writing of 6A64 6165 hex to this
object.
Subindex F2 hex: Clear
• Clears the lifetime information by the writing of 6A64 6165 hex. Clear is executed only when the Life-
time Information Corruption Warning exists.
9 - 94
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User's Manual (I586)