Omron R88M-1M Series User Manual page 403

4 Configuration and Wiring
Use your hand, instead of tool, etc. when changing the cable outlet direction. Otherwise, a large
amount of force is applied easily even toward not-specified direction and may cause failure of
the connector.
Do not pull out a cable during the change of cable outlet direction. Doing so may cause failures
of a connector and a cable. Also, the change shall be up to five times. The change over five
times may result in failure of the connector.
Precautions for Correct Use 4
Wire cables not to contact with Servomotors, which have high temperature.
4 - 45
AC Servomotors/Servo Drives 1S-series with Built-in EtherCAT® Communications User's Manual (I586)