Calibrating the Autosampler's XYZ Robot
Replacing the Autosampler Adapter Plate
Thermo Scientific
To calibrate the autosampler's XYZ robot, follow the instructions in this chapter.
Contents
•
Replacing the Autosampler Adapter Plate
•
Managing Plate Formats
•
Preparing the Autosampler for the Calibration Routines
•
Calibrating Plates
•
Calibrating the Wash Bottle and Extra Vial Positions
For the ASC autosampler, the calibration covers the following areas of the autosampler.
The installed plate adapter will hold the 48 standard HPLC or a SBS standard microtiter plate
(96 or 384), plus the 6 additional vials for blanks/standards/QC.
The additional plate adapter is for PCR stripes or SBS standard microtiter plates (96 or 384),
plus the 6 additional vials for blanks/standards/QC.
Microtiter plate or vial plate
Wash solvent bottles
EASY-nLC 1200 Troubleshooting & Maintenance Guide
8
Extra vials
Waste bottle
with needle
wash insert
229